This section includes Government security products including GSA approved combination locks, lock parts, GSA container parts, accessories, and service tools.
For additional drill bits and other items used in the neutralization of GSA containers, please see the category, Cutting Tools and Drill Bits.
-
STRONGARM CARBIDE DRILL BIT - 1/4" X 6"
StrongArm Security
$7.97Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes.SA01-B$7.97 -
STRONGARM CARBIDE DRILL BIT - 1/4" X 4"
StrongArm Security
$7.16Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes.SA01-A$7.16 -
OPEN/CLOSED MAGNET
MBA USA, Inc.
$6.85These magnetic signs are commonly used on GSA Containers. One side is "OPEN" and the other side is "CLOSED", indicating the status of the container. They can be used on safes or file cabinets in general or any other container that magnets will stick to...MB57$6.85 -
Strongarm 2, 1/4" x 6" Carbide
StrongArm Security
$7.97StrongArm 2, 1/4" x 6" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...SA2C-1/4x6$7.97 -
STRONGARM CARBIDE DRILL BIT - 5/16" X 5"
StrongArm Security
$8.25Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes.SA01-C$8.25 -
KABA-MAS X-10 LOCK PACKAGE - (DLA NSN 5340-01-625-9851 - GSA NSN 5340-01-613-2078)
Kaba
$1,286.26X-10 High Security Lock. NSN 5340-01-613-2078 (GSA) - NSN 5340-01-625-9851 (DLA) The X-10 High Security Lock is a fourth generation electromechanical lock. The X-10 was developed in conjunction with the US Government and meets Federal Specification...KM-X10$1,286.26 -
Strongarm 2, 1/4" x 4" Carbide
StrongArm Security
$7.16StrongArm 2, 1/4" x 4" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...SA2C-1/4x4$7.16 -
Strongarm 2, 5/16" x 5" Carbide
StrongArm Security
$8.25StrongArm 2, 5/16" x 5" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to reduce...SA2C-5/16x5$8.25 -
S&G Change Key, 3-Wheel
Sargent & Greenleaf
$16.11This change key fits modern 3-wheel S&G mechanical safe locks. Works with the 6730 Series, 8400 Series, 8500 Series, and the Model 2937. This change key is also available with a convenient plastic handle: Click here for details.SGU8$16.11 -
STRONGARM DIAMOND CORE - 1/4" X 6"
StrongArm Security
$33.00Diamond Tip drill Bits are designed to cut carbide matrix hard plates in GSA containers. The tip is electroplated with diamonds. Lubricant provided with each drill washes away debris. After coring carbide matrix with the diamond bit, you can cut mild...SA02-A$33.00 -
Two-Sided Telephone Keypad Magnet
MBA USA, Inc.
$6.00This two-sided magnet has a traditional telephone keypad diagram on one side and an alternative diagram on the other. Keep one of these on your safe to aid in memorizing your safe combination. Just set your safe combination so the numbers...MB58$6.00 -
S&G 8077 Combination Padlock w/ Change Key
Sargent & Greenleaf
$284.04Combination padlock meeting Federal Specification FF-P-110J Built to conform to stringent government specifications, including 30-minute protection against expert manipulation and 10-minute protection against surreptitious entry attack Used by...SG8077-108$284.04 -
X-0 DUST COVER
$24.95This product was designed especially for the X-0 series of locks. It protects against unwanted spinning of the dial, fits firmly over the dial ring and is clear for easy viewing of the X-0 lock.LKM962$24.95 -
X-10 / X-09 Change Key
Kaba
$10.13Kaba-Mas change key for "X-0" series locks. Works on all X-07, X-08, X-09, and X-10 High Security Safe Locks, as well as the CDX-07, CDX-08, CDX-09, and CDX-10 Pedestrian Door Deadbolts. Also for Cencon series locks. We also have available the same...KM-107061$10.13 -
StrongArm 2 Carbide Drill Bit, 3/8" x 5"
StrongArm Security
$9.50StrongArm 2, 3/8" x 5" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...SA2C-3/8x5$9.50 -
X-09 / X-10 Dial Retaining Ring
Kaba
$1.62Replacement X-0 dial retaining ring. This retaining ring will fit the hubs for all X-0 series locks. (X-07, X-08, X-09, X-10)KM-504085$1.62 -
Kaba-Mas CDX-10 Lock Package w/ Strike #3, Black Finish, Pedestrian Door Application
Kaba
$1,674.75CDX-10 High Security Lock w/ #3 Strike, Type VI. NSN 5340-01-626-0087 The CDX-10 is manufactured per Federal Specification FF-L-2890B and is approved as a Type VI Auxiliary Deadbolt lock. It is for use on standard egress doors that are not on a required...KM-CDX10-3$1,674.75 -
X-10 / X-09 Hub Assembly
Kaba
$10.91Replacement Kaba-Mas hub assembly for X-09 and X-10 locks. Includes dial retaining ring and Lubriplate grease.KM-504067$10.91 -
S&G PADLOCK COMBO RECOVERY SET
MBA USA, Inc.
$52.34If an error is made when setting a new combination to a Sargent & Greenleaf padlock, models 8077 or 8088, the lock can be reset if the change key hole is still open. This set of tools is designed to reset the wheels in the lock so a...MB92$52.34 -
STRONGARM HOLE SAW - CARBIDE, 1.5"
StrongArm Security
$33.00The bi-metal saws are for penetrating the container skin and the carbide saws will cut through the bolts. For one GSA container opening with your Mini-Rig you will need: (1) Mini-Rig Bolt Saw Guide # SA03-E, (1) Bi-Metal Hole Saw # SA03-G, (2)...SA03-F$33.00