This section includes Government security products including GSA approved combination locks, lock parts, GSA container parts, accessories, and service tools.
For additional drill bits and other items used in the neutralization of GSA containers, please see the category, Cutting Tools and Drill Bits.
-
X-10 Dial, Black
Kaba
$19.29Replacement dial for the Kaba-Mas X-10 High Security electromechanical combination lock. This is the black dial. If you need the dial in gray, see part number KMA-504086. Note: The X-09 uses a gray dial, the X-10 used a gray dial until...KM-504068$19.29 -
AEROSHELL 22 GREASE 3 OZ (6 x 1/2 OZ)
MBA USA, Inc.
$28.96A versatile multipurpose grease used as a combination lock lubricant. Package includes 6 capsules. Corrosion inhibited and fortified against oxidation, AS22 has excellent anti-wear properties, plus a wide useful temperature range. Although AS22 is...AS22$28.96 -
This item is out of stock, but its components may be readily available in our warehouse. Contact us to see how we can help!
X-10 Spindle Assembly w/ Screw
Kaba
$21.51Replacement spindle for the X-10 high security lock. Accommodates doors or drawers up to 4.5" from the mounting surface of the lock to the mounting surface of the dial ring. Includes attaching screw.KM-524004$21.51 -
AEROSHELL 22 GREASE 1 OZ (2 X 1/2 OZ)
MBA USA, Inc.
$16.34A versatile multipurpose grease used as a combination lock lubricant. Package includes 2 capsules. Corrosion inhibited and fortified against oxidation, AS22 has excellent anti-wear properties, plus a wide useful temperature range. Although AS22 is...AS22-A$16.34 -
COMPACT DIAL PULLER
MBA USA, Inc.
$113.13Stop slamming off safe dials! This unique tool pulls the dial off with steady pressure. Simply attach to the dial with the six hardened set screws. Then, gradually screw in the foot posts against the safe door until the dial pulls off. No more...MB13$113.13 -
LUBRIPLATE GREASE FOR X-10 LOCKS
Kaba
$1.66This is the lubricant recommended by Kaba Mas for use when installing X-10 locks (also X-09 and X-08 locks). It must also be used to lubricate an X series lock in the performance of routine maintenance/service. FED-STD-809D, paragraph 4.4.2...KM-9810004$1.66 -
S&G Change Key, 8077/8088
Sargent & Greenleaf
$19.16Change key for the Sargent & Greenleaf model 8077 padlock. Also works for the model 8088 padlock. Includes combination changing instructions.SG8077-043$19.16 -
GSA SAFE SAVER PIN PK OF 5 (1/4")
$39.32The GSA Safe Saver Pin was designed and developed specifically for GSA container and vault door repair. These pins are driven into the drilled hole and welded on both ends to comply with the repair requirements of Federal Standard 809. Sold in packs of 5...LKMGSA2250$39.32 -
S&G 2937 Lock w/ Dial & Ring Standard & Mosler Bolt
Sargent & Greenleaf
$472.74Designed to meet federal specification FF-L-2937 for securing field safes, armory vault doors, weapons containers, and other GSA-approved containers, S&G’s High-Security Mechanical Combination Lock offers rugged construction, simple combination...SG2937-200$472.74 -
X-Series Stick-on Cable Guides (10-Pack)
Kaba
$4.55These stick-on cable guides are used for routing the cables during the installation of the Kaba-Mas X-10 High Security Combination Lock. Also used on the models X-08 and X-09.KM-505071$4.55 -
1/4" x 4" MP3 Carbide Drill Bit
Lockmasters, Inc.
$7.36MP3 Carbide Drill Bit 1/4" x 4" Designed to work on very hard material, great for GSA red label containers The tip has a negative rake unlike other carbide bitsLKM1/4X4C$7.36 -
X-09 / X-10 Dial, Gray
Kaba
$19.29Gray replacement dial for the Kaba-Mas X-09 or X-10 high security electromechanical combination lock. This is the gray dial. If you need the dial in black, see part number KM-504068. Note: The X-09 came with a gray dial, and the X-10...KM-504086$19.29 -
REJECTION LABEL (SOLD IN QTY OF 6)
MBA USA, Inc.
$4.50These labels are paper with a silver metallic surface. They read, "NOT AUTHORIZED: FOR STORAGE OF CLASSIFIED INFORMATION, and are used on filing cabinets, safes and other storage containers to make is clear that they are not to be used for the storage of...RLP02$4.50 -
STRONGARM CORE CUTTER - 1/4" X 6"
StrongArm Security
$27.51After coring carbide matrix with the diamond bit, you can cut mild steel casing on Relsom and Maxalloy to remove the core with matching core cutter hole saws (not for cutting hardened steel).SA02-A1$27.51 -
EXTRA LONG CARBIDE END MILL 1/4" X 6"
MBA USA, Inc.
$49.47Four flute, center cutting extra long end mill 1/4" x 6". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and...LEM250-6$49.47 -
MOSLER GSA HANDLE CLASS 3 OR 6 - BLACK LABEL
$48.95Replacement handle for Mosler, black label GSA containers. Fits single lock class 3 and class 6 drawers. Includes mounting screws. This handle does not fit Mosler Red label containers. It also does not fit black label containers...MSN73402000A$48.95 -
GSA RECERTIFICATION LABEL PACK
MBA USA, Inc.
$25.00GSA Recertification Label package. Includes one recertification label and paperwork for performing a recertification inspection. GSA recertification labels may only be purchased from MBA USA by Inspectors who have graduated from our GSA...RLP01$25.00 -
StrongArm Mini-Rig Pro Kit, Includes: T-1 & T-2 Templates
StrongArm Security
$1,100.75Versatility, fast set up, precise depth control, and accuracy makes safe drilling easier with the StrongArm Mini Rig®. With its innovative design and quality construction, the Mini Rig® weighs only 3 lbs., but supplies drilling pressure not...SA03$1,100.75 -
SPARE SCREWS KIT FOR THE MINI RIG
Paragon Tools
$5.00If the template attaching screws to your Mini Rig are getting worn, here is a replacement set to get you going again. The set comes with 2 of each of three different length screws and a hex wrench. Order a couple of sets. It’s nice to have spares...MB19-B$5.00 -
STRONGARM CARBIDE END MILL - 1/4" X 6"
StrongArm Security
$44.00Solid Carbide Mill-Drills The perfect solution for drilling X-O locks! X-O locks require perfectly placed holes in the lock case when drilling for lost combinations. Even trickier, the drill must not damage critical components located inside that...SA-EM4$44.00