DBB Morticer Accessories

An excellent addition to the DBB Door Lock Morticer packages and their related accessories! The Corner Chisel easily cuts 90º corners to square off circular edges. Simply line the straight edges of the cut & strike the edge with a hammer...

Offset housing kit to supplement the DBB Morticer from Souber Tools. This housing is used to offset the location of drilling an edge bore in a door or door jamb.

Long shaft for lock pockets up to 180mm (7") deep for use with the DBB Morticer from Souber Tools. For a replacement short/standard shaft (100mm / 4"), see PSJIG/SS. For an extra long (265mm / 10") shaft, see PSJIG/XXLS.

Extra long threaded clamp screws up to 200mm wide. Used with the DBB Door Lock Morticer (see packages here).

Housing kit for doors thicker than 55mm or 2 1/8" to supplement the DBB Morticer from Souber Tools.

We have taken individual "Small Bore" accessories for the DBB Door Lock Morticer and packaged them together at a discounted price for your convenience. This package can be stored inside your existing DBB Morticer Carrying Case. The Small Bore Package...

Extra long shaft for lock pockets up to 265mm (10") deep for use with the DBB Morticer from Souber Tools. For a replacement short/standard shaft (100mm / 4"), see PSJIG/SS. For a long shaft (180mm / 7"), see PSJIG/LS.

Long wood drill for the DBB Lock Morticer (PSJIG-1) sized 10mm x 1250mm or 3/8" x 49".

Slider Repair Kit for the DBB Lock Morticer.

The long drill adapter has been specifically designed for the easy installation of electric lock cables through wooden doors, from lock to hinge. After cutting the lock mortice, the long drill adapter kit converts a morticer into a guide for a long...

Long wood drill for the DBB Lock Morticer (PSJIG-1) sized 10mm x 950mm or 3/8" x 37".

The tube clip on the Souber DBB Morticer acts as a stop when sliding the housing up and down.  Replacements are available if yours is lost or damaged.

Spare depth Stop for the DBB Morticer.

This adapter is used in cases where someone wants to drill a door without making an actual mortice. E.g. from the hinge side to the lock mortice. It enables the working drill to be pulled back into the adapter and only  small part of the drill...

Replacement standard boring shaft for the DBB Morticer from Souber Tools. For boring pockets up to 100mm (4") deep. For the Long Boring Shaft (up to 180mm/7"), see PSJIG/LS For the Extra Long Boring Shaft (up to 265mm/10" deep) see PSJIG/XXLS

Replacement Allen wrench and 6 screws.

Boring shaft for use with small bore housing and small bore system cutters #PSCWB13 and #PSCWB15.

Standard housing kit for doors up to 55mm or 2-1/8".

The Small Bore Housing readily replaces the standard housing for morticing smaller locks. In addition, you will need the small bore shaft (PSDBB/SBS) and a small bore cutter.  Small bore cutters available are:  DBB Wood Cutting Bit 13.2mm...

We have taken the individual "Small Bore" accessories available for the DBB Door Lock Morticer and packaged them together at a discounted price for your convenience. This package can be stored inside your existing DBB Morticer Carrying Case. The Small...