Drilling and Repair

Drilling and Repair

For additional drill bits and other items used in the neutralization of GSA containers, please see the category, Cutting Tools and Drill Bits.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • STRONGARM DIAMOND CORE - 1/4" X 6"

    StrongArm Security

    $30.00
    Diamond Tip drill Bits are designed to cut carbide matrix hard plates in GSA containers. The tip is electroplated with diamonds. Lubricant provided with each drill washes away debris. After coring carbide matrix with the diamond bit, you can cut mild...
    SA02-A
    $30.00
    Qty in Cart: 0
    Quantity:
    Price:
    $30.00
    Subtotal:
  • STRONGARM 2, 1/4" X 4" CARBIDE

    StrongArm Security

    $6.95
    StrongArm 2, 1/4" x 4" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...
    SA2C-1/4x4
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • STRONGARM 2, 1/4" X 6" CARBIDE

    StrongArm Security

    $7.95
    StrongArm 2, 1/4" x 6" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...
    SA2C-1/4x6
    $7.95
    Qty in Cart: 0
    Quantity:
    Price:
    $7.95
    Subtotal:
  • STRONGARM HOLE SAW - CARBIDE, 1.5"

    StrongArm Security

    $30.00
    The bi-metal saws are for penetrating the container skin and the carbide saws will cut through the bolts. For one GSA container opening with your Mini-Rig you will need: (1) Mini-Rig Bolt Saw Guide # SA03-E, (1) Bi-Metal Hole Saw # SA03-G, (2)...
    SA03-F
    $30.00
    Qty in Cart: 0
    Quantity:
    Price:
    $30.00
    Subtotal:
  • STRONGARM CORE CUTTER - 1/4" X 6"

    StrongArm Security

    $25.00
    After coring carbide matrix with the diamond bit, you can cut mild steel casing on Relsom and Maxalloy to remove the core with matching core cutter hole saws (not for cutting hardened steel). 
    SA02-A1
    $25.00
    Qty in Cart: 0
    Quantity:
    Price:
    $25.00
    Subtotal:
  • GSA SAFE SAVER PIN PK OF 5 (1/4")

    $39.95
    These pins have a carbide center and are intended to repair 1/4" drilled holes. These pins are the only GSA approved repair pin for red and blue label equipment after they are drilled under the dial ring. (FED-STD 809B, repair method 1B) ...
    LKMGSA2250
    $39.95
    Qty in Cart: 0
    Quantity:
    Price:
    $39.95
    Subtotal:
  • StrongArm Mini-Rig Pro Kit, Includes: T-1 & T-2 Templates

    StrongArm Security

    $945.00
    Versatility, fast set up, precise depth control, and accuracy makes safe drilling easier with the StrongArm Mini Rig®. With its innovative design and quality construction, the Mini Rig® weighs only 3 lbs., but supplies drilling pressure not...
    SA03
    $945.00
    Qty in Cart: 0
    Quantity:
    Price:
    $945.00
    Subtotal:
  • STRONGARM 2, 5/16" X 5" CARBIDE

    StrongArm Security

    $7.95
    StrongArm 2, 5/16" x 5" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials to...
    SA2C-5/16x5
    $7.95
    Qty in Cart: 0
    Quantity:
    Price:
    $7.95
    Subtotal:
  • STRONGARM CARBIDE ENDMILL - 1/4" X 6"

    StrongArm Security

    $42.95
    Solid Carbide Mill-Drills The perfect solution for drilling X-O locks! X-O locks require perfectly placed holes in the lock case when drilling for lost combinations.  Even trickier, the drill must not damage critical components located inside that...
    SA-EM4
    $42.95
    Qty in Cart: 0
    Quantity:
    Price:
    $42.95
    Subtotal:
  • 5/16" SAFE SAVER PIN

    $11.50
    5/16" Safe Saver carbide centered mild steel safe repair pin. Use to repair 5/16" hole through the hardplate. Requires drilling 3/8" hole through door to allow tapered repair pin to seat into hardplate.  
    LKMSSP2312
    $11.50
    Qty in Cart: 0
    Quantity:
    Price:
    $11.50
    Subtotal:
  • 1/4" SAFE SAVER PIN

    $11.50
    1/4" Safe Saver carbide centered mild steel safe repair pin. Use to repair 1/4" hole through the hardplate. Requires drilling 5/16" hole through door to allow tapered repair pin to seat into hardplate.
    LKMSSP2250
    $11.50
    Qty in Cart: 0
    Quantity:
    Price:
    $11.50
    Subtotal:
  • STRONGARM 2, 3/16" X 4" CARBIDE

    StrongArm Security

    $6.20
    StrongArm 2, 3/16" x 4" Carbide Drill Bit. Chrome Moly Steel Vacuum Brazed with Copper to withstand extreme temperatures. Aggressive cutting, 5 axis diamond ground titanium tungsten carbide tips. Fluting designed for quick removal of materials...
    SA2C-3/16x4
    $6.20
    Qty in Cart: 0
    Quantity:
    Price:
    $6.20
    Subtotal:
  • STRONGARM HOLE SAW - BI-METAL, 1.5"

    StrongArm Security

    $17.35
    The bi-metal saws are for penetrating the container skin and the carbide saws will cut through the bolts. For one GSA container opening with your Mini-Rig you will need: (1) Mini-Rig Bolt Saw Guide # SA03-E, (1) Bi-Metal Hole Saw # SA03-G, (2)...
    SA03-G
    $17.35
    Qty in Cart: 0
    Quantity:
    Price:
    $17.35
    Subtotal:
  • SPARE SCREWS KIT FOR THE MINI RIG

    MBA USA, Inc.

    $4.00
    If the template attaching screws to your Mini Rig are getting worn, here is a replacement set to get you going again. The set comes with 2 of each of three different length screws and a hex wrench. Order a couple of sets. It’s nice to have spares...
    MB19-B
    $4.00
    Qty in Cart: 0
    Quantity:
    Price:
    $4.00
    Subtotal:
  • Total: items /

Adding your products to cart