This section includes Government security products including GSA approved combination locks, lock parts, GSA container parts, accessories, and service tools.
For additional drill bits and other items used in the neutralization of GSA containers, please see the category, Cutting Tools and Drill Bits.
-
SUMOSPIN CART FOR MOVING GSA CONTAINERS
SUMO SPIN
$1,495.00Flat-Rate Shipping $175 to 48 contiguous US states. All other locations, including APO and FPO addresses, please call for custom quote. Like most good ideas, the SumoSpin cart came from a need. With GSA containers weighing in at 600+ pounds empty...SUMO1000$1,495.00 -
GSA Parchment Spray Paint (12oz) - Ground Ship only
$21.50These 12oz spray paints are mixed to match GSA factory colors. Note: Since each factory mixes its own colors, some variation may occur. Choose from: Black (#CA01) Gray (#CA02) Parchment (#CA03) Variety Pack - All 3 Colors...CA03$21.50 -
STRONGARM TEMPLATE T2 - Mosler Mechanical Locks
StrongArm Security
$78.09Provides drill points for Mosler 120 & 302-402 mechanical locks. Resources: StrongArm Mini Rig Template GuideSA-T2$78.09 -
Black Plastic Cover for S&G 2890 Panic Mechanism
Sargent & Greenleaf
$32.68Black Plastic Cover for S&G 2890 Panic MechanismSG2890-625$32.68 -
STRONGARM HOLE SAW ARBOR WITH PILOT BIT
StrongArm Security
$20.35Perfect for holding your hole saws (SA03-F and SA03-G) when drilling the bolts on GSA containers. Complete with pilot drill.SA03-I$20.35 -
Hamilton Red Label Class 6 Legal Size Drawer Head, Gray (No Lock)
Hamilton
$750.00Replacement Control Drawer Head for Class 6, Legal-Size, GSA Approved File Cabinets made by Hamilton Products Group. Painted Gray. (Color no. 26134, as specified in SAE-AMS-STD-595.) Lock not included.HPG-1041A-G$750.00 -
$78.09 -
Dial Pusher Bolt w/ Threaded Hollobore
StrongArm Security
$20.00Replacement dial pusher bolt with threaded Hollobore. This set is a replacement for the StrongArm dial puller. The threaded Hollobore has internal threads to accommodate the dial puller's shaft for slamming dials off or the pusher bolt for...SA-DPB$20.00 -
10PK REPLACEMENT TIPS FOR LKMPDLOT
Lockmasters, Inc.
$40.0010-pack of replacement tips for the LKMPDLOT pedestrian door lock opening tool.LKMPDLOT-TIPS$40.00 -
GSA SAFE SAVER PIN PK OF 5 (3/8")
$42.50The GSA Safe Saver Pin was designed and developed specifically for GSA container and vault door repair. These pins are driven into the drilled hole and welded on both ends to comply with the repair requirements of Federal Standard 809. Sold in packs of 5...LKMGSA2375$42.50 -
MINI MITER/CUT-OFF SAW KIT
MBA USA, Inc.
$83.87This saw is perfect for cutting X-0 tubes with precision and ease! It is also a very handy tool to have in your shop or van. This Miter/Cut-off saw cuts steel, brass, aluminum, plastic and wood. It has a built-in vise that adjusts for cuts from 45...MB91$83.87 -
3/8" SAFE SAVER PIN
$10.943/8" Safe Saver carbide centered mild steel safe repair pin. Use to repair 3/8" hole through the hardplate. Requires drilling 1/2" hole through the door to allow tapered repair pin to seat into the hardplate.LKMSSP2375$10.94 -
LONG CARBIDE END MILL 5/16" x 4"
MBA USA, Inc.
$50.60Four flute, center cutting extra long end mill 5/16" x 4". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and profiling...LEM312-4$50.60 -
#9 STRIKE/CDX/LOCK
Kaba
$54.78Kaba-Mas #9 strike to work with the CDX-09, CDX-10, and DKX-10 Lock Extensions. Use on out-swinging double doors and out-swinging doors without a door jamb.KM-114006$54.78 -
Short X-10 Cable Assembly (Up to 2.25" Door Thickness)
Kaba
$73.44Replacement cable assembly for the Kaba-Mas X-10 high security lock. These are shorter than standard length cables, which can make installation easier by eliminating some of the excess length of the cables. Cable length will accommodate...KM-521011$73.44 -
S&G 2937 Spy Proof Dial, Black & White
Sargent & Greenleaf
$87.49Replacement dial assembly for the Sargent & Greenleaf model 2937 combination lock. This dial is not intended for use with other models of locks. Resources: S&G 2937 Instructions (510 KB) S&G 2937 Data...SG2937-002$87.49 -
Z-Spring for S&G 2937 & 8500 Series Locks
Sargent & Greenleaf
$5.51Z-Spring for S&G 2937 & 8500 Series LocksSG8550-102-001000$5.51 -
EXTRA LONG CARBIDE END MILL 3/8" X 6"
MBA USA, Inc.
$77.87Four flute, center cutting extra long end mill 3/8" x 6". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and profiling...LEM375-6$77.87 -
This item is out of stock, but its components may be readily available in our warehouse. Contact us to see how we can help!
GSA 1ST STRIKE KIT®
MBA USA, Inc.
$2,975.00This kit was specifically designed for the technician who services GSA security containers. It contains everything you need to open black or red label containers in one lightweight (about 30 lbs) package! Our kit supports approved opening methods: sawing...MB09-D$2,975.00 -
STRONGARM CARBIDE END MILL - 3/8" X 6"
StrongArm Security
$52.50Solid Carbide Mill-Drills The perfect solution for drilling X-O locks! X-O locks require perfectly placed holes in the lock case when drilling for lost combinations. Even trickier, the drill must not damage critical components located inside that...SA-EM3$52.50