An excellent addition to the DBB Door Lock Morticer packages and their related accessories! The Corner Chisel easily cuts 90º corners to square off circular edges. Simply line the straight edges of the cut & strike the edge with a hammer. It...

Cordless Magnetic Drill Press MX-V with switchable magnet technology.  Provides superior holding power, weighs less, and has a smaller footprint compared to other magnetic drill presses. Weighing in at only 22 lbs and with a foot print of only 7.5"...

The MBA USA 7" Ruler. A small but excellent addition to the tool bag of any locksmith or craftsman! Our 7-inch ruler has fine, square-cut edges so that measurements begin and end precisely at the edges of the ruler, rather than indented.

This tool allows you to make precise installation of Adams Rite 1850S, 4530, 4710 & 4711 series locks. Also works with the International DH 1822 & DL4511. Covers the following backsets: 7/8", 31/32" & 1 1/8". Manufacturer Information:  ...

Magnetic Drill Press Universal Adapter for 1/2" Drill Now includes high quality made in Germany Röhm brand keyed chuck! The Universal Adapter allows the MX-V to be used with almost every 1/2” Corded or Cordless Drill ever made...

The Framon Bullseye Installation Jig (BULL) will assist installers with drilling wood or metal doors. The tool is completely self-contained besides a 3/32” allen wrench to change bore sizes. Features: 1-1/2” or 2-1/8” Cross...

MBA’s Plastic Mallet is an excellent tool for any technician or craftsperson to add to their tool bag! At just 4 ounces and less than 10 inches in length, the mallet is excellent for personal and professional projects of all kinds. The mallets...

Noga Deburring tool with heavy duty swivel blade. For fast and easy removal of burrs from straight or curved edges and holes. This tool also comes in very handy for deburring the tubes when installing Kaba-Mas X-10 locks.

Installation fixture for pedestrian door deadbolt locks. It has mounting hole patterns for CDX-0 series locks (CDX-07, CDX-08, CDX-09, CDX-10) and others such as the S&G 2890PDL. This fixture features hardened drill bushings to ensure proper...

Maglogix® MX-V Extended Height Guideway Kit. Allows use of drill bits up to 12" long with your MX-V drill rig! Instructions for replacing standard height guideway with extended height guideway: Raise the guideway to the maximum height. Loosen...

The Cabinet Lock Drill Guide includes important features such as: Rubber lined jaws to protect cabinet doors and give greater holding power.  Five sizes of drill bushings for versatility. An adjustable stop for repeat installations on the same...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

  Collar/Adapter for Magnetic Rig (61.7mm OD x 43mm ID) 61.7mm OD x 43mm ID Fits many European drills and many 1/2" corded drills.  (Includes most Metabo, most Fein, most Festool, most Makita 1/2" corded drills.)

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Completely portable, attaches instantly to any smooth, non-porous surface. Large 3" (76 mm), V-grooved, iron jaws open to 3" (76 mm) with precision screw action. Universal ball joint rotates vise to any desired working angle. Includes a set of protective...

Features: Gears according to DIN For all geared chucks Technical Info: Key size: 2 Spigot Ø D: 1/4 " Shaft length L: 1625 "

The Cabinet Lock Drill Guide includes important features such as: rubber lined jaws to protect cabinet doors and give greater holding power.  Five sizes of drill bushings for versatility and an adjustable stop for repeat installations on the same...

Magnetic Drill Press Universal Adapter for 3/8" Drill The Universal Adapter allows the MX-V to be used with almost every 3/8” Corded or Cordless Drill ever made. Its Ball Bearing design allows for daily heavy-duty use in the most demanding...

Locating and drilling inside mortise cylinder holes. Installing an inside cylinder on an existing mortise lock can be frustrating to center correctly. The HIT-21 will make the job fast, accurate and easy. You don't even have to take the mortise lock out...