Warding files are essential for hand filing safe deposit keys, warded padlock keys, and lever keys. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

Refill for the Cylinder Accessory Kit (part# MS-CAK-15). Contains 6 identical pieces of item described above.

Refill for the Cylinder Accessory Kit (part# MS-CAK-15). Contains 6 identical pieces of item described above.

Plate used for impressioning locks. Holds "Double D" cam locks and automotive cylinders such as Honda, Mazda, Nissan 82, Toyota 83+.

Some locksmiths prefer round files for impressioning--they are much lower in cost and can still produce a quality key. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

These cylinder guards form a cone of hardened steel which protects rim and mortise cylinders from attacks by wrenches, vise grips, and channel locks. A wave washer is included  to eliminate sloppy installations. Standard Size is good for most 5 pin...

6" Wooden File Handle by Souber® Tools.

Change Tool for Lefebure / Bullseye PL80, AL81 & AL82

LAB I/C Capping Strips, 250-Pack Each LAB Capping Strip is designed to work with the A1 Cap-5® Press. The brass strip is designed for small format interchangeable cores with 0.150 inch spacing. Each strip will cap four 6 or 7 pin cores and...

LAB Interchangeable Core Key Gauge, BEST A2 / A3 / A4 For A2, A3 and A4 systems Small size (3-3/4″ x 2″) Stainless steel

This is an optional pulling block for the LPT-255 puller. Use our LPT-255-125 Lever Pulling Tool to quickly and easily remove the locked lever when picking is not an option. This block was designed to pull the larger levers on the Corbin and Russwin...

This is an optional pulling block for the LPT-255 puller. The LPT-255-130 block is for use on the larger Yale levers that are too large to fit in the standard pulling block.