This section includes Government security products including GSA approved combination locks, lock parts, GSA container parts, accessories, and service tools.
For additional drill bits and other items used in the neutralization of GSA containers, please see the category, Cutting Tools and Drill Bits.
-
#2 STRIKE/CDX/LOCK
Kaba
$39.89Kaba-Mas #2 strike to work with the CDX-09, CDX-10, and DKX-10 Lock Extensions. Use on standard out-swinging doors.KM-114004$39.89 -
Strongarm Template T6 - Government Locks
StrongArm Security
$78.09Referred to as the "Government Lock" template. Has drill points for S&G's Model 2740 (A and B versions) and drill points for Kaba-Mas X-08, X-09, and X-10. A must have for technicians working with GSA security containers and vault doors. Works with...SA-T6$78.09 -
AUGMENTATION KIT FOR THE MINI RIG
Paragon Tools
$81.50This kit was designed to augment the StrongArm Mini Rig Pro Kit. Its items were selected to improve performance and make setup easier. The kit includes items that reduce the chances of parts vibrating loose while drilling, metric screws for...MB19$81.50 -
INS AND OUTS OF GSA CONTAINERS AND VAULTS
$105.00A compilation of information on GSA approved containers and vault doors. This book, compiled by Joe Cortie, is comprised mostly of pictures of the outsides and insides of GSA containers and vault doors to show the boltworks and lock handing. ...MB94$105.00 -
4 OZ PLASTIC MALLET
MBA USA, Inc.
$19.99MBA’s Plastic Mallet is an excellent tool for any technician or craftsperson to add to their tool bag! At just 4 ounces and less than 10 inches in length, the mallet is excellent for personal and professional projects of all kinds. The mallets...MB43$19.99 -
NOGA - 2-PIECE HAND DEBURRING TOOL SET W/ PLASTIC HANDLE AND S10 BLADE
NOGA
$7.70Noga Deburring tool with heavy duty swivel blade. For fast and easy removal of burrs from straight or curved edges and holes. This tool also comes in very handy for deburring the tubes when installing Kaba-Mas X-10 locks.NDT$7.70 -
Laser Guide for Magnetic Drill Press
Paragon Tools
$78.95This laser will aid in positioning your magnetic drill press. The outside diameter of the guide’s housing has been sized to fit into the standard drill collar/adapter for the Maglogix MagnaDrill, Strongarm Magnetic Drill Press or Alfra RotaBest...PT120$78.95 -
STRONGARM MINI-RIG SCREW SET
StrongArm Security
$14.13Replacement set of screws for the Strong Arm Mini Rig. Includes different three lengths of template attaching screws and screws needed for attaching the rig base at locations other than where the hollow bore bolt is used. Also includes three...SA03-ScrewSet$14.13 -
Will-Burt / Mosler Latch Button
Will-Burt
$14.30Replacement Will-Burt thumb latch button. Used on Will-Burt, Diebold-Mosler, and Mosler drawers.WB-06147000A$14.30 -
SUMOSPIN CART FOR MOVING GSA CONTAINERS
SUMO SPIN
$1,495.00Flat-Rate Shipping $175 to 48 contiguous US states. All other locations, including APO and FPO addresses, please call for custom quote. Like most good ideas, the SumoSpin cart came from a need. With GSA containers weighing in at 600+ pounds empty...SUMO1000$1,495.00 -
GSA RECERTIFICATION PAPERWORK ONLY
MBA USA, Inc.
$2.00GSA Recertification paperwork. Includes one recertification inspection form and one summary form. GSA recertification labels and paperwork may only be purchased from MBA USA by Inspectors who have graduated from our GSA Approved Container...RLP03$2.00 -
RESET DEVICE FOR S&G 2740B
Sargent & Greenleaf
$41.60If a Sargent & Greenleaf Model 2740B's low battery warning signal is ignored for approximately one hundred openings, the lock will go into a "Lock Open Latch" condition. This prevents the lock from locking, but can be reset using a "444 Device" and a...SG2740-444$41.60 -
STRONGARM CARBIDE END MILL - 5/16" X 6"
StrongArm Security
$49.50Solid Carbide Mill-Drills The perfect solution for drilling X-O locks! X-O locks require perfectly placed holes in the lock case when drilling for lost combinations. Even trickier, the drill must not damage critical components located inside that...SA-EM5$49.50 -
CDX-10 INSTALLATION JIG
Lockmasters, Inc.
$199.00Installation fixture for pedestrian door deadbolt locks. It has mounting hole patterns for CDX-0 series locks (CDX-07, CDX-08, CDX-09, CDX-10) and others such as the S&G 2890PDL. This fixture features hardened drill bushings to ensure proper...LKM401$199.00 -
GSA Parchment Spray Paint (12oz) - Ground Ship only
$12.85These 12oz spray paints are mixed to match GSA factory colors. Note: Since each factory mixes its own colors, some variation may occur. Choose from: Black (#CA01) Gray (#CA02) Parchment (#CA03) Variety Pack - All 3 Colors (#CA04) Downloads: ...CA03$12.85 -
X-10 Tube Kit
Kaba
$44.51Replacement tube kit for X-10 high security locks. The kit contains one inner tube and one outer tube. These tubes will also fit X-07, X-08, and X-09 locks.KM-104017$44.51 -
Z-Spring for S&G 2937 & 8500 Series Locks
Sargent & Greenleaf
$5.35Z-Spring for S&G 2937 & 8500 Series LocksSG8550-102-001000$5.35 -
#3 STRIKE/CDX/LOCK
Kaba
$34.87Kaba-Mas #3 strike to work with the CDX-09, CDX-10, and DKX-10 Lock Extensions. Use on standard inswinging doors.KM-114005$34.87 -
PEDESTRIAN DOOR LOCK OPENING TOOL
Lockmasters, Inc.
$335.00This unique tool will open pedestrian door locks such as CDX-10, CDX-09, LM5100 and S&G 2890PDL locks using a non-invasive method that requires minimal drilling with no damage to the lock itself. No need to go through adjacent walls to gain entry in...LKMPDLOT$335.00 -
BOOK GSA CONTAINER IDENTIFICATION, REVISED EDITION
MBA USA, Inc.
$135.00GSA Container Identification, Revised Edition A Comprehensive Guide to Understanding and Identifying GSA Approved Security Containers and Vault Doors.By Andy DennisonISBN 978-0-9841455-1-5 Publication date: 2014 Compiled and written by one of the...MB88$135.00