RETROFIT MOUNTING PLATE
- SKU:
- LKM1256
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
When retrofitting current mechanical or electronic locks to safes that have non-standard lock mounting patterns, weld the Retrofit Mounting Plate into place for standard lock mounting.
The plate is pre-drilled and tapped to the standard mounting pattern for most Sargent & Greenleaf, LaGard, Big Red, Securam, AMSEC and other locks. Mild steel allows you to drill and tap additional holes in the field if necessary.
Related Products
NL / LP Keypad Mounting Adaptor
NL Lock
$8.00
Keypad mounting adapter. Allows installation of a keypad with a horizontal mounting pattern onto a safe with a vertical mounting pattern.
Works with keypads from the following...
LP-MA2
SafeLogic XTREME Lock Left Hand Mounting Adaptor
SECURAM
$70.03
SecuRam XTREME Adapter Plate for left hand application.
With the LH adaptor installed, the overall height of the lock and adapter assembly is 1-3/4”
SRx-XLHA-1501
Standard Footprint Mounting Plate
Paragon Tools
$16.00
This is a 1/4" thick, weldable steel plate with the standard mounting pattern pre-drilled. The four corner holes are tapped 1/4-20 UNC to match modern lock mounting screws. Use this when...
PT110
Standard Footprint Mounting Plate (METRIC)
Paragon Tools
$16.00
This is a 1/4" thick, weldable steel plate with the standard mounting pattern pre-drilled. The four corner holes are tapped M6x1 to match Metric lock mounting screws. Use this when...
PT110M