Perfect for holding your hole saws (SA03-F and SA03-G) when drilling the bolts on GSA containers. Complete with pilot drill.

This is the standard size tap for threading holes for safe lock mounting screws.  The plug tap is used to start threading the hole.  Use the bottoming tap to cut threads close to the bottom of the hole. These taps can be used with our tap...

This is the standard size tap for threading holes for safe lock dial ring and keypad mounting screws.  The plug tap is used to start threading the hole.  Use the bottoming tap to cut threads close to the bottom of the hole. These taps can be...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Four flute, center cutting extra long end mill 5/16" x 4". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and profiling. Why...

Relton Groo-V Tip 3/4" x 6" Carbide Tipped Drill Bit (Reduced 1/2" Shank) Specialized serrated tip is designed to cut nearly all materials Penetrates up to 50% faster than standard masonry bits Specs: Point Dia: 3/4" Shank...

Gold Rush Cobalt Spiral Step Tip (5/16") Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits. They can be used to enlarge existing holes or to create new, smoother holes in a wide...

T-Handle Tap Wrench Made in USA Accommodates taps up to 1/4"

High speed steel (HSS) drill bit.  5/16" diameter.  18" long.

High speed steel (HSS) drill bit.  3/8" diameter.  18" long.

High speed steel (HSS) drill bit.  3/8" diameter.  12" long.

High speed steel (HSS) drill bit.  3/8" diameter.  24" long.

Relton Groo-V Tip 3/8" X 4" Carbide Tipped Drill Bit Specialized serrated tip is designed to cut nearly all materials Penetrates up to 50% faster than standard masonry bits Specs: Point Dia: 3/8" Shank Dia: 3/8" Overall Length: 4"...

Precision Twist Drill, Extended Length High Speed Drill Bit (1/4" x 8") Drill Bit Size: 1/4" Overall Length: 8" Coating/Finish: Bright Finish Cutting Direction: Right Hand Shank Type: Straight Material: High Speed Steel Drill Point Angle: 118 Degree

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes. 

Gold Rush Cobalt Spiral Step Tip (3/16") Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits. They can be used to enlarge existing holes or to create new, smoother holes in a wide...

Dual flute direction reduces the contact patch on the work piece and therefore provides easier operator control while still maintaining a good surface finish. Size: SA-1 Diameter: 1/4” Shank Diameter: 1/4” Length of Cut: 5/8” Overall...

Solid Carbide Mill-Drills The perfect solution for drilling X-O locks! X-O locks require perfectly placed holes in the lock case when drilling for lost combinations.  Even trickier, the drill must not damage critical components located inside that...