These cylinder guards form a cone of hardened steel which protects rim and mortise cylinders from attacks by wrenches, vise grips, and channel locks. A wave washer is included  to eliminate sloppy installations. Standard Size (shown) is good for...

This is the size driver needed to remove the small screw when replacing the flex cables on an X-10, X-09, or X-08.  This inexpensive tool will come in very handy when needed.  Using a small Allen or hex wrench cannot tighten the screw enough to...

Safe Door Hinge Shim Refill (HS-9) OD: 1- 1/6" ID : 5/8" Thickness: 0.020 Pack of 10

Safe Door Hinge Shim Refill (HS-3) OD: 1- 1/6" ID : 7/16" Thickness: 0.020 Pack of 10

Hardened Pins for Safe Repair, designed and manufactured by industry expert Joe Reustle. No need to cut these to length like taper pins.  Pre-cut to .400" length.  One end of each pin features a slight chamfer to make it easier to start the pin...

HPC's patented Horizontal Clutch™ Tool (HPC-CO-75) is unlike any other on the market. When the handles of this tool are separated, the hook at the end of the tool is pulled inward causing the tool to grip or bind the horizontal linkage rod. This patented...

LAB .005 Universal Bottom Pin .205" (150-Pack) Flat center with precision chamfer, nose, finish and length Color-coded to lock industry standards Precision Machined to exceed industry standards Nose designed to decrease key insertion forces 150 pins per...

LAB .005 Universal Bottom Pin .210" (150-Pack) Flat center with precision chamfer, nose, finish and length Color-coded to lock industry standards Precision Machined to exceed industry standards Nose designed to decrease key insertion forces 150 pins per...

LAB BEST Interchangeable Core Springs, Long, 500-Pack Compatible with Best I.Core and Dorma full size SKC Phosphor Bronze Available in Vial and Poly Bag 500-Pack

LAB Door Prep Template Stainless steel, laser engraved for years of use For times when a paper template door jig is just not enough Finish on doors will not be damaged Locate backsets 2 3/8″ or 2 3/4″ for the lockset / deadbolt 2 1/8″...

Lockset Installation 3-Piece Kit with 1" Spade Bit Includes 2-1/8" hole saw with 3/8" shank arbor and 1" spade bit. For installation of locksets with a 2-1/8" crossbore and a 1" edgebore. Instructions included. Two options available: Lockset...

MBA Pinning Mat Made of durable, slip-resistant silicone Flexible and lightweight Includes pre-cut slots for pins, followers, and cylinders Large working space for pinning and lock servicing Blue color Dimensions: Width: 10.5" Length: 8" Height: 0.5"

#4 One-Way Winding Key (WK4X1)

Loading springs and top pins has never been easier. The Top Pin Loader is a double-sided follower for .495" and .550". Load the springs and top pins in the holes of the follower for fast and easy transfer into the cylinder housing.

Refill for the Cylinder Accessory Kit (part# MS-CAK-15). Contains 6 identical pieces of item described above.

LAB .005 Universal Bottom Pin .115" (150-Pack) Flat center with precision chamfer, nose, finish and length Color-coded to lock industry standards Precision Machined to exceed industry standards Nose designed to decrease key insertion forces 150 pins per...

LAB .005 Universal Bottom Pin .165" (150-Pack) Flat center with precision chamfer, nose, finish and length Color-coded to lock industry standards Precision Machined to exceed industry standards Nose designed to decrease key insertion forces 150 pins per...

5" Wooden File Handle by Souber® Tools. Ideal for 8" files.

Warding files are essential for hand filing safe deposit keys, warded padlock keys, and lever keys. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

Similar to HPC'’s patented Vertical and Horizontal Clutch Tools and Super Snare, this compact action tool will grab lock buttons and not let go!By separating the handles the loop retracts providing a secure grip on the lock button. Combined with a 3/8...