Lockmasters, Inc.

MP3 Carbide Drill Bit 1/4" x 6" Designed to work on very hard material, great for GSA red label containers The tip has a negative rake unlike other carbide bits

MP3 Carbide Drill Bit 1/4" x 4" Designed to work on very hard material, great for GSA red label containers The tip has a negative rake unlike other carbide bits

GSA Drawer Bolt Probe Tool

GSA Drawer Bolt Hook w/ Knob

MP3 Carbide Drill Bit 5/16" x 8" 

The Magnum Bolt Buster II is a specialized drill rig designed to cut the locking bolts on GSA approved file cabinets.  The design takes the high torque drill motor needed to cut these hardened...

This tool is designed to properly measure and mark the tubes for the Kaba Mas X Series Locks (X-07, X-08, X-09 & X-10) without the risk of damaging the cables. 

10-pack of replacement tips for the LKMPDLOT pedestrian door lock opening tool.

This unique tool will open pedestrian door locks such as CDX-10, CDX-09, LM5100 and S&G 2890PDL locks using a non-invasive method that requires minimal drilling with no damage to the lock itself...

This is a unique tool for anyone that services X-08 and X-09 locks. In order to remove the back cover from these locks with an LOBC pin installed, the pin must be pulled as the lock is being opened...

The GSA Security Container Bolt Saw is designed to offer a fast and safe way to neutralize GSA Class 5, 6 and 7 security file containers without damage to the combination lock and in accordance with...

Installation fixture for pedestrian door deadbolt locks. It has mounting hole patterns for CDX-0 series locks (CDX-07, CDX-08, CDX-09, CDX-10) and others such as the S&G 2890PDL. This...

This is a handy tool designed to remove the back cover from the X-0 series of locks, especially when the lock is mounted in the hardplate box of a GSA container. Don't take a needless chance of...