S&G Automatic Bolt Retraction Kit for 2890C

The first Government approved 2890C ABR solution.
The S&G 2890C Automatic Bolt Retraction (ABR) solution combines life safety with ADA access for individuals with disabilities for secure entry when paired with an automatic door operator (ADO).

In addition to meeting the government’s FF-L-2890C lock types for US government or US military applications, S&G also integrates accessibility with life safety. When paired with short- or long-range badge readers or other RFID-compatible components, the S&G ADA-compliant 2890C Automatic Bolt Retraction solution allows secure touchless access and exit control.

The modular design connects with any approved RFID credential reader, making the exit device easy to integrate with existing security components. ABR engages when credentials are approved and RFID signal registers with the exit device – allowing hands-free access.

The 2890C ABR Kit is GSA approved for use with the following types, which are to be wired into existing electronic access control systems:

• Type II (Primary doors, handle on the interior side.)
• Type IV (Primary doors, panic bar on the interior side.)
• Type VII (Secondary doors, handle on the interior side.)
• Type VIII (Secondary doors, panic bar on the interior side.)

Features:

• Touchless Access Control when the device is connected to short-or long-range badge readers or other RFID-compatible components.
• No-touch, long-distance, automatic opening when credentials are confirmed at an RFID reader
• Interior panic bar for life safety single-motion egress. (Types IV and VIII)
• Five-year limited warranty.

Two purchase options:

• SG2890-ABR-KIT  Retrofit Kit (for adding ABR to S&G 2890C locks that are already installed)
• SG2890-ABR-INSTALL  Factory Install (only available with purchase of new S&G 2890C lock package, ABR will be installed at factory)

Combine ABR with ADO (Automatic Door Operator)

By combining the automatic door operator (SG2890-ADO-KIT, sold separately) with the ABR, your clients can ensure they are 100% ADA compliant.

When ordering the ADO, customers receive 2 of the ADA access buttons that can be installed on either side of the door and the operator which is installed on the door.

This will pair with the Automatic Bolt Retraction (ABR) so that when the access button is pushed from the outside, but the RFID chip is not swiped the client's door will not open. If the RFID chip is swiped and passed when pressing the access button the door will automatically open.

From the inside of the door, which does not require RFID access, the access button will automatically open the door.

ADO Features:
The S&G ADO solution is a non-pivot drive and combination of belt, gear and pulley for less torque, less power, absorbs more abuse, and is quieter than other automatic door openers while complying with all US and Canadian ADA requirements.

• ADA Compliant
• Meets ANSI A156.19
• Certified for use as fire door operators (3-hour rating)
• Self-Tuning, Self-Learning
• Minimum 5 seconds from close to open
• Stays open for 5 seconds
• Force: 15 lbs-6.8 kg
• Push or Pull (In door, Out swing)
• Activation: Knowing Act
• Optional Safety Device
• Power: 1A, 100W
• Non-Handed
• Extremely Quiet Operation

Resources:

• S&G 2890C ABR/ADO System Brochure