Heavy Duty 1/2" 9.0 Amp 2-Speed Hammer Drill

Heavy Duty 1/2" 9.0 Amp 2-Speed Hammer Drill (SBEV 1000-2)

• Rated input power: 1010 W
• Amps: 9 AMPS
• Maximum torque: 354 / 124 in-lbs
• Max. capacity in masonry: 7/8 "
• Max. capacity in concrete: 25/32 "
• Max. capacity in steel: 5/8 / 3/8 "
• Max. capacity in soft wood: 1 9/16 / 1 "
• No-load speed: 0 - 1000 / 0 - 2800 RPM

Features:

• Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
• Thumbwheel for speed preselection
• Robust die cast aluminum gear housing for optimum heat dissipation and durability
• Rotating carbon brush bridge for maximum power even when rotating counter-clockwise, e.g. when removing jammed screws
• Metabo Long-life motor with dust protection for long service life
• Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly.
• Forward and reverse rotation
• Spindle with hexagonal recess for screwdriver bits for working without chuck
• Restart protection: prevents unintentional start-up after power supply interruption
• Cable-protecting ball joint for the best freedom of motion when working
• With metaBOX, the smart solution for transportation and storage

Parameters

• Rated input power: 1010 W
• Amps: 9 AMPS
• Output power: 560 W
• Maximum torque: 354 / 124 in-lbs
• Max. capacity in masonry: 7/8 "
• Max. capacity in concrete: 25/32 "
• Max. capacity in steel: 5/8 / 3/8 "
• Max. capacity in soft wood1 9/16 / 1 "
• No-load speed: 0 - 1000 / 0 - 2800 RPM
• Revolutions at rated load: 1000 / 2800 RPM
• Maximum impact rate: 53200 BPM
• Gears: 2
• Chuck capacity: 1/16 - 1/2 "
• Collar diameter: 1 11/16 "
• Drill spindle with hexagonal recess: 1/4 "
• Drill spindle thread: 1/2 " - 20 UNF
• Chuck clamping type: Geared Chuck
• Weight (without power cable): 6 lbs
• Cable length: 13 ft

Vibration

• Drilling in metal: 4.2 m/s²
• Uncertainty of measurement K: 1.5 m/s²
• Impact drilling concrete: 17 m/s²
• Uncertainty of measurement K: 1.5 m/s²

Noise Emission:

• Sound pressure level103 dB(A)
• Sound power level (LwA)114 dB(A)
• Uncertainty of measurement K3 dB(A)

Resources:

• Operating Instructions
• Data Sheet