High speed steel (HSS) drill bit.  5/16" diameter.  12" long.

Cobalt Drill Bit - 3/8" Jobber Length.  Also known as standard length drills, jobber drills are the most popular and widely used lengths that can be used in portable and machine drilling.  The 3/8" drill bit is 5" in length. These cobalt drill...

This is the standard size tap for threading holes for safe lock mounting screws.  The plug tap is used to start threading the hole.  Use the bottoming tap to cut threads close to the bottom of the hole. These taps can be used with our tap...

This is the standard size tap for threading holes for safe lock dial ring and keypad mounting screws.  The plug tap is used to start threading the hole.  Use the bottoming tap to cut threads close to the bottom of the hole. These taps can be...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...

Four flute, center cutting extra long end mill 5/16" x 4". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and profiling. Why...

Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes. 

Used by Safe Technicians for years, StrongArm carbide tipped drill bits are by far the most popular bits for drilling hard steel in safes.

Perfect for holding your hole saws (SA03-F and SA03-G) when drilling the bolts on GSA containers. Complete with pilot drill.

High speed steel (HSS) drill bit.  5/16" diameter.  24" long.

UP TO 50X LIFE*High performance carbide is welded to the cutting edge for durability and to help prevent tooth loss. EXTREMELY VERSATILEAggressive tooth design drills through wood, steel, stainless, cast iron, fiber cement & plaster FAST, EASY PLUG...

Gold Rush Cobalt Spiral Step Tip (1/8") Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits. They can be used to enlarge existing holes or to create new, smoother holes in a wide...

Four flute, center cutting extra long end mill 3/8" x 6". Solid carbide and made in the USA! These extra-long, corner radiused, four flute, solid carbide end mills feature a 30 helix angle and are center cutting for plunging, slotting and profiling. Why...

Relton Groo-V Tip 3/4" x 6" Carbide Tipped Drill Bit (Reduced 1/2" Shank) Specialized serrated tip is designed to cut nearly all materials Penetrates up to 50% faster than standard masonry bits Specs: Point Dia: 3/4" Shank Dia: 1/2" Overall...

High speed steel (HSS) drill bit.  3/8" diameter.  18" long.

High speed steel (HSS) drill bit.  5/16" diameter.  18" long.

High speed steel (HSS) drill bit.  3/8" diameter.  12" long.

T-Handle Tap Wrench Made in USA Accommodates taps up to 1/4"

Gold Rush Cobalt Spiral Step Tip (5/16") Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits. They can be used to enlarge existing holes or to create new, smoother holes in a wide...

Self Centering Drill Guide - 1/4" Hex Shank design for Quick Release. Create accurate screw holes when installing new hinges, latches, and other hardware on doors. Spring-loaded end for locating screw holes...