Frequently bought together:
Description
This is the standard size tap for threading holes for safe lock mounting screws. The plug tap is used to start threading the hole. Use the bottoming tap to cut threads close to the bottom of the hole.
These taps can be used with our tap wrench.
- Size: 1/4-20
- Shank Diameter: 0.255
- Thread Length: 1"
- Overall Length: 2-1/2"
- Flutes: 4
- Limit: H2
- Square Size: 0.191
- Tap Style: Plug
Related Products
Related Products
1/4-20 HSS 4-Flute Bottoming Hand Tap
MBA USA, Inc.
$9.14
This is the standard size tap for threading holes for safe lock mounting screws. The bottoming tap cuts threads close to the bottom of the hole. Use a plug tap to start cutting the threads...
MB161B
8-32 HSS 4-Flute Plug Hand Tap
MBA USA, Inc.
$7.06
This is the standard size tap for threading holes for safe lock dial ring and keypad mounting screws. The plug tap is used to start threading the hole. Use the bottoming tap to cut...
MB162P
8-32 HSS 4-Flute Bottoming Hand Tap
MBA USA, Inc.
$7.06
This is the standard size tap for threading holes for safe lock dial ring and keypad mounting screws. The bottoming tap cuts threads close to the bottom of the hole. Use a plug tap to start...
MB162B
T-handle Tap Wrench (accommodates Taps up to 1/4")
MBA USA, Inc.
$14.89
T-Handle Tap Wrench
Made in USA
Accommodates taps up to 1/4"
MB160
STRONGARM LONGARM DRILL BIT - HSS, 1/4" X 12"
StrongArm Security
$13.20
High speed steel (HSS) drill bit. 1/4" diameter. 12" long.
SALG-1
STRONGARM LONGARM DRILL BIT - HSS, 1/4" X 18"
StrongArm Security
$15.40
High speed steel (HSS) drill bit. 1/4" diameter. 18" long.
SALG-2
STRONGARM LONGARM DRILL BIT - HSS, 1/4" X 24"
StrongArm Security
$18.71
High speed steel (HSS) drill bit. 1/4" diameter. 24" long.
SALG-3
Lock Mounting Screw, 1/4-20 x 0.240
Sargent & Greenleaf
$2.88
Lock Mounting Screw
1/4-20 x 0.240
SG8700-108-011000