-
BRASS PLATED - LONG CYLINDER GUARD US3
Major Mfg.
$20.49These cylinder guards form a cone of hardened steel which protects rim and mortise cylinders from attacks by wrenches, vise grips, and channel locks. A wave washer is included to eliminate sloppy installations. Standard Size is good for most 5 pin...MS-CGL-3$20.49 -
Heavy Duty 1/2" 9.0 Amp 2-Speed Hammer Drill
Metabo
$310.09Heavy Duty 1/2" 9.0 Amp 2-Speed Hammer Drill (SBEV 1000-2) Rated input power: 1010 W Amps: 9 AMPS Maximum torque: 354 / 124 in-lbs Max. capacity in masonry: 7/8 " Max. capacity in concrete: 25/32 " Max. capacity in steel: 5/8 / 3/8 " Max...HD03-METABO$310.09 -
LOCKSET INSTALLATION 3-PIECE KIT WITH 7/8" SPADE BIT
Timberline Hand Tools
$9.32Lockset Installation 3-Piece Kit with 7/8" Spade Bit Includes 2-1/8" hole saw with 3/8" shank arbor and 7/8" spade bit. For installation of locksets with a 2-1/8" crossbore and a 7/8" edgebore. Instructions included. Two options available: Lockset...AT-650-100$9.32 -
REFILLS FOR HSK SAFE DOOR HINGE KIT (MS-HS-2)
Major Mfg.
$15.50Refill for our Safe Door Hinge Kit (part # MS-HSK-10). You get 10 identical pieces of the hinge shim shown in the package illustrated above. (See package label for shim dimensions).MS-HS-2$15.50 -
$6.70 -
Backset Adapter Kit for Major Hit-Series Installation Tools (Converts to 3-3/4" or 5" Backset)
Major Mfg.
$54.98Backset Adapter Kit that can be used with ALL of the Major HIT-Series installation tools. This kit consists of standoff bolts for 3-3/4" and 5" backsets. Provides for total on-the-job versatility.MS-HIT-BAK$54.98 -
This item is out of stock, but its components may be readily available in our warehouse. Contact us to see how we can help!
Change Tool for Lefebure / Bullseye PL80, AL81 & AL82
Bullseye S.D. Locks
$22.83Change Tool for Lefebure / Bullseye PL80, AL81 & AL82B-ALPL-CHT$22.83 -
Forstner Bit 1-1/4"
$22.12Drill pocket-holes, flat-bottom holes*, etc., using any 3/8" or larger portable drill or stationary drill press. Forstner pattern bits are well known for their ability to drill clean and chip-free holes in wood. Amana Tool® uses only the finest...AT-FO-317$22.12 -
This item is out of stock, but its components may be readily available in our warehouse. Contact us to see how we can help!
LAB Interchangeable Core Capping Strips, 250-Pack
Lab
$112.00LAB I/C Capping Strips, 250-Pack Each LAB Capping Strip is designed to work with the A1 Cap-5® Press. The brass strip is designed for small format interchangeable cores with 0.150 inch spacing. Each strip will cap four 6 or 7 pin cores and...LB-CSP250$112.00 -
This item is out of stock, but its components may be readily available in our warehouse. Contact us to see how we can help!
LAB Interchangeable Core Key Gauge, BEST A2 / A3 / A4
Lab
$11.29LAB Interchangeable Core Key Gauge, BEST A2 / A3 / A4 For A2, A3 and A4 systems Small size (3-3/4″ x 2″) Stainless steelLB-LKGIC$11.29 -
Major Mfg. Lever Pulling Block for Corbin Russwin
Major Mfg.
$223.39This is an optional pulling block for the LPT-255 puller. Use our LPT-255-125 Lever Pulling Tool to quickly and easily remove the locked lever when picking is not an option. This block was designed to pull the larger levers on the Corbin and Russwin...MS-LPT-255-125$223.39 -
Major Mfg. Lever Pulling Block for Yale
Major Mfg.
$209.89This is an optional pulling block for the LPT-255 puller. The LPT-255-130 block is for use on the larger Yale levers that are too large to fit in the standard pulling block.MS-LPT-255-130$209.89 -
Time Lock Movement Clips (2-Pack)
Paragon Tools
$4.00These clips are used to immobilize the wheel train in a time lock movement during disassembly. A clip is placed to gently hold the last wheel before removing the escapement. 2 clips are included in each pack. ParagonMB38-D$4.00 -
TIME LOCK SERVICE TWEEZERS
MBA USA, Inc.
$27.56These are quality, anti-magnetic stainless steel tweezers. Selected for their size and tip shape, they are used for handling small, delicate parts such as the escapement of time lock movements. Swiss Made.MB38-B$27.56
