Type a description for this product here...

The Skinny Flipper is made of super bouncy spring steel.  The laminated body allows you to manipulate the working end from outside of the car.

Inventory Tags 100 included in pack

This kit combines commonly used locksmith files and even includes pin tweezers. Comes in a roll-up carrying case. Locksmith files include: Four warding files: 4"” bastard 6”" bastard 4”" #2 cut 6”" #2 cut Two 6"” round files: #2 cut #4 cut (1/4”" dia...

HPC's Original Slim Jim™ has been the entry tool by which all others have been judged since its introduction in 1967. Although automobiles have changed considerably in recent years, the large number of applicable cars on the road allows the Slim Jim™ to...

Restore files by unclogging metal particles lodged in the millings. Steel wire bristles mounted on wood back and handle. Approximately 10” overall. 

The Switch Stick is a five foot (1.5m) long bendable tool with a unique hook end designed to open cars from the inside. This tool slips into a vehicle between the window and door frame. Once inside, the Switch Stick acts as a third hand allowing you to...

An easy way to wedge open vehicle doors! The Lever Wedge is designed with two pivot points that allow you to spread a door from its frame and then, with a simple push, wedge it open! Once in place the door can be separated farther with the HPC Lever...

Pippin files make great impressioning files. You are able to make flat, rounded, and tapered cuts all with the same file. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

Warding files are essential for hand filing safe deposit keys, warded padlock keys, and lever keys. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

HPC's 5-Foot Super Snare allows you to enter a vehicle and pull up buttons, grab keys, pull open levers, and much more! The HPC-CO-78 is a 5-Foot long (150cm) metal tube with a wire inside that forms a loop on the end. To open the loop, slide the...

Type a description for this product here...

Some locksmiths prefer round files for impressioning--they are much lower in cost and can still produce a quality key. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

The Stretch Killer™, has the most universal dimensions of all of the Under & Over car opening tools.

Some locksmiths prefer round files for impressioning--they are much lower in cost and can still produce a quality key. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

HPC's patented Horizontal Clutch™ Tool (HPC-CO-75) is unlike any other on the market. When the handles of this tool are separated, the hook at the end of the tool is pulled inward causing the tool to grip or bind the horizontal linkage rod. This patented...

Loading springs and top pins has never been easier. The Top Pin Loader is a double-sided follower for .495" and .550". Load the springs and top pins in the holes of the follower for fast and easy transfer into the cylinder housing.

Warding files are essential for hand filing safe deposit keys, warded padlock keys, and lever keys. Remember, the higher the number (0-2-4) assigned to the file, the finer the cut will be.

Similar to HPC'’s patented Vertical and Horizontal Clutch Tools and Super Snare, this compact action tool will grab lock buttons and not let go!By separating the handles the loop retracts providing a secure grip on the lock button. Combined with a 3/8...

The Collapsible Opener is one of the only car openers that is currently in production that preceded the Original Slim Jim™. Once the 3 segments are assembled, the tool totals 62" (157cm) in length and can reach across the car to unlock the opposite side...