Don-Jo Wrap Around Plate (514-S-CW) 22 Gauge Stainless Steel 5" by 12" for Mortise Lock with Full Escutcheon Trim 1-5/8" by 7-5/16" Rectangle Cut Out for 1-3/4" Door with 2-3/4" Backset Satin Stainless Steel Finish Resources: Wrap-Around Plates...

Dead Bolt Lock, 1-1/8" Backset, Faceplates Flat Clear (Aluminum) and Dark Bronze. Features: For aluminum stile doors Five-ply laminated steel bolt with concealed hardened steel pin provides maximum security on single leaf doors Cycle testing exceeds...

Don-Jo Remodeler Plate (RP-13509-605) Remodeler Plate 3-1/2" by 9" 2-1/8" Centered Hole Bright Brass Finish Resources: Anti-Microbial Solutions Catalog Door Accessory Hardware Catalog Ladder Pulls & Offset Ladder Pulls Design Guide

Ilco SFIC Uncombinated Core 6-Pin Best A Keyway Satin Chrome Finish

Don-Jo Wrap Around Plate for Double Locks with 5-1/2" Center (258-PB-CW) 22 Gauge Steel 4-1/4" by 12" 2-1/8" Holes for Deadbolt and for Cylindrical Lock for 1-3/4" Door with 2-3/4" Backset Bright Brass Finish Resources: Wrap-Around Plates Catalog

Don-Jo Remodeler Plate (RPK-109-630) Remodeler Plate 3-1/2" by 9" Contains 2) RP-13509 and 1) CV-86-C Satin Stainless Steel Finish Resources: Anti-Microbial Solutions Catalog Door Accessory Hardware Catalog Ladder Pulls & Offset Ladder Pulls...

Ilco Mortise Cylinder - Turnknob. Machined from solid brass bar stock, engineered and manufactured to OEM specifications. Master Key and Grand Master Key quality, and are re-keyable to original manufacturers systems. The broad selection of models and...

Ilco 1-1/8" Backset Zinc Hook Bolt Lock with 2 Faceplates.   (No mortise cylinders included in this package.) Two faceplates: Dark Bronze and Clear Zinc (Aluminum) For aluminum stile doors Five-ply laminated steel bolt with concealed hardened...

Ilco branded zinc die cast cylinders are used primarily for storefront lock and exit device applications. These cylinders are designed as an inexpensive option when brass quality and longevity is not a requirement. 1 mortise key cylinder. Cylinders...

Don-Jo Latch Protector for Aluminum Door (GLP-307-SL-LHR) Latch Protector for Aluminum Door Solves Pull Handle Interference Fits Over Cylinder 3/8" Offset 2-5/8" by 7" 12 Gauge Steel Handed Center of Cylinder Hole Located at 2-1/2" from Bottom of Plate...

Dead Bolt Lock, 1-1/2" Backset, Faceplates Flat Clear (Aluminum) and Dark Bronze. Features: For aluminum stile doors Five-ply laminated steel bolt with concealed hardened steel pin provides maximum security on single leaf doors Cycle testing exceeds...

Don-Jo Latch Protector for Outswinging Doors with Electronic Cylindrical Locks (MELP-210-SL) Latch Protector for Outswinging Doors with Electric Strikes 2-5/8" by 10" 12 Gauge Steel Furnished with Carriage Bolts Washers and Acorn Cap Nuts for Safety and...

Ilco branded zinc die cast cylinders are used primarily for storefront lock and exit device applications. This cylinder is designed as an inexpensive option when brass quality and longevity is not a requirement. • 1" Length only (25.4 mm) •...

Don-Jo Latch Protector for Center Hung Outswinging Aluminum Doors (OLP-2650-SL) Latch Protector for Center Hung Outswinging Aluminum Doors 1-1/8" Offset 3-5/8" by 7" Steel Aluminum Painted Finish Resources: Latch Protectors Catalog

Don-Jo Remodeler Plate (RP-13509-630-2) Remodeler Plate 3-1/2" by 9" 2-1/8" Centered Hole with Thru-bolt Holes Satin Stainless Steel Finish Resources: Anti-Microbial Solutions Catalog Door Accessory Hardware Catalog Ladder Pulls & Offset Ladder...

Ilco branded zinc die cast cylinders are used primarily for storefront lock and exit device applications. These cylinders are designed as an inexpensive option when brass quality and longevity is not a requirement. 1 mortise key cylinder. Cylinders...

FatIvan Fold-Up Door Stop w/ Magnets - White Finish. The FatIvan is the world’s only fold-up door chock with magnets. The magnets are embedded in the tool, underneath the clear tape. When you need a door held open, the FatIvan is a must-have, handy...

Ilco Mortise Cylinder - Turnknob. Machined from solid brass bar stock, engineered and manufactured to OEM specifications. Master Key and Grand Master Key quality, and are re-keyable to original manufacturers systems. The broad selection of models and...

Don-Jo Scar Plate for Converting 2-3/8" to 2-3/4" Backset (DSP-135-605) Scar Plate for Converting 2-3/8" to 2-3/4" Backset 3-1/2" O.D. 1-1/2" I.D. Bright Brass Finish Resources: Anti-Microbial Solutions Catalog Door Accessory Hardware Catalog Ladder...

HES Plug In Connector (2007M) 12 and 24VDC hard wire connectors with 4" wire leads