Spacer Example
OMEGA Locks

OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD

(8 reviews) Write a Review
SKU:
OM-500-CH-RH
Shipping:
Calculated at Checkout
  • OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD
  • OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD
  • OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD
  • OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD
  • OMEGA REDUNDANT SWINGBOLT KEY LOCK PACKAGE W/ CHROME KEYPAD
$59.88
Frequently bought together:

Description

AVAILABLE WHILE SUPPLIES LAST! Product discontinued by manufacturer.

OMEGA Redundant Swingbolt Key Lock with Chrome Keypad. The feature that sets this lock apart from its competition is that the user codes can be 1 digit to 8 digits in length.

Safe Requirements:

  • The hole on your safe door must be 1” in diameter in order for the key to insert into the lock.

Features include:

  • 2 User Codes
  • Reset (Manager) Code
  • User Codes can be 1 digit to 8 digits
  • Pair of keys can also open lock
  • Wrong Try Penalty Lock Out (1 minute)
  • Enable/Disable User Codes
  • Single 9V battery operation

Resources:

View AllClose

8 Reviews

  • 5

    Simple and easy

    Posted by THOMAS BRYNER on 19th Sep 2022

    Comes with everything needed for a clean and professional installation.

  • 5

    Omega 500 ch

    Posted by Bernie on 10th Apr 2021

    Instructions are for programming only basically. The installation on this Centurian which appears to to be the same as some Stackons I have seen, took about 3 hours working slowly. Using harbor freight step bits, Had to drill out lock holes in door, two plates, inside, outside and then a third in the lockset mounting plate, which is welded to the inside panel. Using double sided tape, I positioned the lockset to the mounting plate and marked the 4 mounting holes and drilled and tapped for 1/4 20 Thread. The inside door panel on this safe is covered by the lockset mount so I used a 7/8" Step bit and opened it to 7/8" which works fine for clearance of cable and key. Cleaned up, hooked up and works great. Being mindful that expensive or inexpensive, a lock keeps an honest person honest. With time any lock can be defeated. If the electronics fail, the key will bail me out. I'm happy with it and probably will purchase same again in the future.

  • 4

    Lock Conversion

    Posted by Cap on 27th Mar 2021

    I converted an Older Electronic Safe to the Keyed/Combo Setup. I knew the conversion was going to require the Door to come off, and Welding/Grinding to be performed.. To get he 'Foot Print' of the Key Slot and Bolt Pattern, I Voided the Warranty, and took the cover off the Bolt Assembly to make a Pattern for the Slot and Bolts. Would have been nice to have a Paper Template to work from.. A little tricky to get the Lock back together, but not impossible. The Spring does not jump, and grease holds it in place. I got my Safe back together in about 4 Hours, and it looks nice. I love the Keys!

  • 5

    OMEGA REDUNDANT SWINGBOLT KEY LO

    Posted by Unknown Customer Unknown Customer on 29th Sep 2020

    Shipping was great, product was as advertised. No problem with installation, did have to resize the hole in safe door.

  • 4

    Omega Lock with Key

    Posted by Kevin Miller on 31st Jul 2020

    Good product. Four vs. five stars because the plastic dial surround and tactile feel of the keypad could feel like higher quality but I don’t regret purchasing. Be sure to inspect your safe and visualize having to expand the hole the original shaft goes through to fit the key and wiring. Mine was not super easy but having the backup key is worth it in my opinion.

  • 5

    Perfect for my Stack On Elite!!

    Posted by William Wolf on 13th Mar 2020

    This lock was a perfect replacement for my Stack On Elite! I did have to drill a couple of mount holes on the back keypad plate, but the locations were already marked out. After several non-answered emails to Stack On, I decided to give this a try. Glad I did! Thank You MBA USA!!

  • 5

    Great Lock

    Posted by Unknown on 7th Jul 2019

    Ordered this lock for my Cannon gun safe so I could have the backup of a key for the lock. Installation instructions a bit vague but sufficient. To install this lock there must be a 1" diameter hole in the door and lock mount plate so the key will be able to engage the lock. This is not revealed in the installation instructions. Note that also the steel plate that the lock mechanism actually mounts to is probably going to be a high carbon steel for security reasons making it difficult to drill to say the least. Once I modified my safe for the key and installed lock it works great.

  • 5

    Works great.

    Posted by Mark on 17th Apr 2019

    Very good value for the price. The redundant key lock feature is a nice touch and gives assurance that we will still be able to open the lock if the electronic release fails. Easy to program and use.

View AllClose