Ilco Hook Bolt Lock, 1-1/8" Backset. Lock only.  (No mortise cylinders, no faceplates included with this package.) For aluminum stile doors Five-ply laminated steel bolt with concealed hardened steel pin provides maximum security on single leaf...

Lagard key locking dial cylinder Hudson single sided keyway Works with Lagard keylocking dials: LG1731, LG1779, and LG2090 Keyed Alike Code 040

Cable for Tecnosicurezza electronic safe locks - 17" (45cm).

LEF 7750 Big Nose Little Nose Safe Deposit Lock Brass Pair of Renter Keys

Replacement lock bolt for Sargent & Greenleaf 6600, 6700, 8400, and 8500 series locks.  Two drilled and tapped holes (M4 x .7 thread x 10mm depth) in the end of the bolt. This standard length bolt extends .109" (2.8mm) from lock case in unlocked...

Plastic Snap Cover for LA GARD 3000 Keypad

S&G Spy Proof Dial 5/16" Spindle Satin Chrome 13" DT Spline on 19 8500 Series

Single Nose Changeable Lever Safe Deposit Lock Left Hand Brass

When and how to use the X-08 / X-09 LOBC FIXTURE: Note: Before performing any type of service on any X-08 or X-09 lock, be certain you are thoroughly familiar with the lock's operating procedures. Installation and operating information is available on...

S&G 3/8" x 7" SPINDLE EXTENSION KIT

La Gard 39E Swing Bolt Lock: Manual bolt retraction Manager + 9 Users Time Delay 1-99 Minutes Open period 1-19 Minutes Time Delay Override Dual Code Mode Silent Signal Alarm Remote Override Signal Audit Trail Available (Software Purchased Separately)...

Extended bolt length 1.50" (38.1mm). Limited to stock on hand.

DIAL & RING, FRONT READING, BLACK & WHITE. Features:  Can be used with any Group 2 or Group 2M Lock Models. Can be mixed to create different color finish combinations. Made from die casted zinc material. The Dial with Ring; sits...

Dial Hub Spline Key for S&G 8500 Dial

Complete T-Bolt Lock w/ Removable Core and Mounting Hardware (Code 31) Commonly used in banks on teller drawers, cabinet doors, cash trays, and other under-counter applications Each lock comes with core, housing, T-bolt, clip, spacer collar, and two...

Complete T-Bolt Lock w/ Removable Core and Mounting Hardware (Code 32) Commonly used in banks on teller drawers, cabinet doors, cash trays, and other under-counter applications Each lock comes with core, housing, T-bolt, clip, spacer collar, and two...

Complete T-Bolt Lock w/ Removable Core and Mounting Hardware (Code 56) Commonly used in banks on teller drawers, cabinet doors, cash trays, and other under-counter applications Each lock comes with core, housing, T-bolt, clip, spacer collar, and two...

SD 7750 DLN Nickel 1/2 by Bullseye S.D. Locks. Keys ordered separately. Please note: If you are going to change the changeable lock, you will need to use the Lefebure 7700 Series Change Tool (#JC09). 

Replacement cylinder for both Lever or Knob Kee-Bloks. One hundred keyed different changes available.

Tamper-Resistant T-Handle Cam Lock, Keyed Alike Quarter Turn Clockwise to Open Concealed Mounting Screws Prevent Tampering Locks are Keyed Alike, Key #92301 Each Lock Comes With Two Keys Requires 7/8" Through-Hole Maximum Door/Drawer Thickness: 1/8"...